1 Litres Johnstones Joncryl Water Based Primer Undercoat

1 Litres Johnstones Joncryl Water Based Primer UndercoatPREPARATION: All surfaces to be painted should be clean, dry and free from loose and flaking material. Prime bare metal surfaces with the appropriate Johnstones Primer. Rub down previously painted surfaces with fine waterproof abrasive paper and rinse thoroughly. Avoid the inhalation of dust. Wear a suitable face mask if dry sanding. Special precautions should be taken during surface preparation of pre 1960s paint surfaces over wood and metal as they

PREPARATION:

All surfaces to be painted should be clean, dry and free from loose and flaking material. Prime bare metal surfaces with the appropriate Johnstone’s Primer. Rub down previously painted surfaces with fine waterproof abrasive paper and rinse thoroughly. Avoid the inhalation of dust. Wear a suitable face mask if dry sanding. Special precautions should be taken during surface preparation of pre-1960’s paint surfaces over wood and metal as they may contain harmful lead.

APPLICATION:

Stir well. Easy to apply by brush or roller. Also suitable for application by spray. Do not apply in temperatures below 10˚C or externally when rain is imminent.

COVERAGE:

Approximately 12–14 square metres per litre, depending on the nature and porosity of the surface.

DRYING TIME:

Touch dry in 1 hour. Recoatable after 1–2 hours.

Johnstone's Joncryl Water Based Primer Undercoat is a high quality, acrylic resin based combined primer and undercoat formulated for interior and exterior use on new or bare wood, plaster, hardboard, cement and brickwork. It provides a low odour, quick drying, high opacity alternative to solvent-based primer and undercoat.